HGUC RX-78-2 Gundam Ver. G30th 7-11 Color

That’s a long title there.  You’ll forgive me that I don’t do a WiP as this is pretty much the same Ver. G30th that’s been out for the last several months, just done in new colors.  As I said before, I really like the colors of this kit, and the seals that it comes with really adds to it.  Without further ado, a few pictures for you.

Front711-01

Side711-02

Back711-03

Pimping the rifle711-04

Fairly stable for posing711-05

Out of the blue Eco Gouf attacks!  What does he want?711-06

Why, he needs to pick up the new issue of Gundam Ace at 7-11!711-07

Unlucky for him, this 7-11 has saved the last copy for Amuro.711-08

Who runs in to snag that issue.711-09

 

 

Advertisements

The State of the Gunpla Union – 073009

This week’s notes, along with a photo dump of various pictures over the last few months.

 First off, the Exia snap-build is done.  This is a kit that would benefit from panel lining, so that’s something to do between Sinanju sessions over the next few weeks. 

exia03

 Quick impressions :

  • Smaller than I thought, but that’s to be expected of anything other than Sinanju.
  • Hologram strip parts are neat, but really don’t stand out from a distance. 
  • The led GN drive is cool. 
  • Don’t really like the feet, while having toe, sole, heel for articulation, they kind of suck. 
  • The bling bling swords really come off nice. 
  • The only problem though is again, Bandai puts the sprue cutting points on the blade, so you get a nice chunk of the finish cut off no matter what you do.  
  •  Also the regular swords (hell if I can remember if it’s GN 1, 2, or whatever) tend to fall off the hands pretty easy.  
  • Lastly, it’s not easy, or even recommended to switch between regular Exia and Repair version, so for those who want both, you’ll have to pick up one standard kit and one ignition kit.  For those who then want both kits to light up, you’ll need two ignition kits.

 Now, I haven’t had a chance to sit down and pose with it just yet though, just finished, so these are just initial impressions.  Still, at the cost for the gimmicks, and weapons alone is well worth it.   Overall, was worth waiting past all the HGUC kits and 1/100 kits for this.   Makes you wonder what’s nexts in the Gundam 00 MG line up, hopefully they do the other Gundam’s before jumping to 00, although I would be interested in an O Gundam.

 Next up, the HGUC Kshatriya has been announced for an October release, but I finally stopped to check out the price.  At around a whopping 4200 yen, this is ringing in as a high baller.  Unfortunately, while the price of the MG line is gradually going up, a majority of the kits have managed to stay in the 3000 to 5000 yen range.  HG kits, as we see here, tend to run the gambit though, which some being available for as low as 300 yen, to 4000 yen plus.  I for one would like to see a little more stability in their lower end model line.  I’d buy the Kshatriya at that price if it was an MG kit, but HG is going to make me pause.

Moving on, the buyer for the remaining HGUC Green Tokyo Project Gundam 30th kit has fallen through from lack of response.  If interested, it’s asking price is $40 US dollars (or 4,000 yen) shipped anywhere in the world.  Please post or mail if interested.

Now for the Sinanju summer project, for the time being, I’m stuck waiting for good weather.  Unfortunately the color I picked is fairly sensitive to humidity, going so far as to have a warning to not spray on humid days.  So the project is going to go fairly slow for a while. 

Lastly, I’d like to do a little photo dump of random pictures taken over the last couple of weeks.  I had thought about making it a separate little trend, but figured I’d tack them on the my State of the Gundam Union posts whenever the pictures have piled up.

Here’s the Gunpla parts shop that Danny Choo mentioned before.  It’s the Yellow Submarine shop in the Radio Kaikan, 4th floor.  Quite a load of parts, so could be good if you wanted to stock up on a variety of weapons, etc.  The prices varied from 200~300 yen to 3000 yen(!).   Planning on hitting it up again this weekend so will try and take more pictures.

 pd01

Yellow Submarine also carries pro shop releases.  They had quite a few of the Mechanical Clear Gundam 2.0 available.  I’m debating picking up one the next time I go.  The only problem is that Pro Shop releases can’t be discounted, even by places like Bic Camera, so it’s the full 4,410 yen…

pd02

While checking out the 4th floor of the Radio Kaikan, I saw quite an awesome life sized helmet and figure for Gabranth from FFXI.  Unfortunately, the helmet is over $1,00 dollars, and the figure, while bad-ass, is also around $450 dollars.

pd03

Akihabara Station’s Electric City Exit is under construction.  Wonder how they “new” Station will look

pd04

Debating on making a jump to my first DSLR.  While apparently the Olympus Pen is not technically a “true” DSLR, it’s got style, and takes damn good pictures by the samples I’ve seen.  Now just to use my upcoming 30th birthday as an excuse to get around the price…

pd05

Last, saw my first rainbow in a very long time, while out in Kohoku New Town for dinner. 

pd08

WiP: Ecopla HGUC Gouf

Rather than keep you waiting, lets go ahead and jump into the WiP, it’s short and simple.

The box, like the SD Gundam is monochrome as wellegouf01

The runners are all black, with the original manual, plus bonus sealsegouf01

The leg parts, one leg completed at the topegouf01

Followed by the armegouf01

The body and waist are molded as two parts, with backpack at the bottomegouf01

Power cables are snap and fitegouf01

The torso/waist completedegouf01

All the parts ready to be put togetheregouf01

Compared to the HGUC Hi-ν and Geara Doga, the Gouf build is much simpler, especially with the waist and torso molded as two parts to be snapped together, as this is a much older kit.  This leads to some limitations with the leg movement and posing (no splits for him!) but that can’t be helped.  Again, the draw of Ecopla is the pure black, as it looks pretty cool overall.  While you can sort of see the gate mark damage left from snipping off the runners, overall, it doesn’t really stand out.  In fact, this is a pure cut and fit, with no sanding/design knife trimming at all.  Anyways, next post will be the completed shots.

Ecopla: SD RX-78-2 Gundam

I whipped through the ecopla version of the SD RX-78-2 Gundam and here’s the pictures.  For those not familiar with ecopla, this is Bandai’s way of participating in the new Eco trend occuring everywhere.  The plastic used is all recycled from leftover plastic.  It makes sense, as I’m sure you all are familiar with the fact that there is tons of plastic left over after finishing a build.  Do to the recycled use, the plastic comes out as black, creating yet another “version” of Bandai’s popular kits.  Yet another way to whore the same thing out to the public, while making more money, and making it easier for guys to convince their significant others that it’s ok to spend more money on more kits.  “But honey, it’s eco!”  Hey, I can’t talk, I bought two myself.  

Anyways, from my understanding, ecopla is currently only being sold at Bandai’s hobby center in Shizuoka prefecture and the occasional show.   So these could be considered somewhat limited release.  For those in the greater Tokyo Region, being able pick these up during the Green Tokyo Gundam Project period is a great opportunity.

The box is black and whitesdg1

And the runners all black.  Comes with special sealssdg2

The head, the eyes really stand out now with the blacksdg3

All the parts ready to be put togethersdg4

Close upsdg5

You can build the core fighter as wellsdg7

Or the core booster.sdg8

Overall, the black actually looks fairly cool, and unlike black parts of other kits, there isn’t much white residue or damage from snipping off the parts.  The few seals then actually accent the black as well.  While no pictures of it posing, it’s a SD kit, so don’t expect that much.  Still the black gundam is very compact and cool.  Recommended if you can pick one up.

Gundam in Daiba

Ran out to see the 1/1 scale Gundam in Daiba today.  Pictures just don’t do it justice.  While there are tons of pictures out there, and I’m sure there will be plenty more, here’s mine to add to the bunch. 

Also! I picked up a few extra Gundam Ver. 30th Green Tokyo Gundam Project kits as well, as this is the only place you can get them.  I’ve got 3 extra, and will post details on them.  Like the Sinanju, first come, first serve.

 At Shimbashi station – Take the Yurikamome to Daiba station.gdaiba01

Advertising in the station.gdaiba02

The park is about a 5 minute walk from the station.gdaiba03

And catching a peek as we go.gdaiba04

Various shots around the Gundam.gdaiba06

gdaiba07

gdaiba08

gdaiba09

gdaiba10

gdaiba11

gdaiba12

The crowd started picking up towards the afternoon.gdaiba13

gdaiba14

gdaiba15

And here’s todays damage!gdaiba16

 Picked up the limited HGUC Gundam, the pamphlet along with a couple of the Eco-pla kits.  Throw in a towel and some cookies for good measure.